Initio Inic 950 Driver Download
Initio Inic 950 Driver

INIC-1620/22/23

The Initio INIC-162x provides advanced Host Adapter features in a single 128 pin TQFP package with 2 Serial ATA, 32-bit/66 MHz PCI 2.3 compliant, and Cardbus compliant interfaces. The third memory interface allows access to FLASH and Serial EEPROM devices. The Flash interface provides Read/Write access to the attached BIOS. The Serial EEPROM interface provides Read/Write access to the attached Serial EEPROM for bus configuration information.

Features Summary

PCI 32 bit/66 MHz Interface

PCI 2.3 compliant interface
Burst transfer rate of 264 Mb/s
Built in hardware bus master engine

ATA Interface

Serial ATA Revision1.0a, Serial ATA II Revision 1.0 (Extensions to Serial ATA 1.0).
Serial ATA transfer rate of 1.5 Gb/s.
Supports two SATA/eSATA channels.
Supports SATA NCQ, TCQ commands

Memory Interface

Support for 256K FLASH and Serial E2PROM

Data FIFO

256 Byte data FIFO for each channel

On Board PCI Bus Master Engine

On board Bus Master Engine relieve the system processor from book keeping and enhance performance

Uses Initio¡¦s Proprietary Host Adapter Mode of Operation

Initio Proprietary AutoDMA mode (IDMA)
Queued/Overlapping ATA Commands Support

Other Features

Disk RAID 0/1 support (only for inic-1622TA2/1623TA2).
SATA hot plug/unplug hardware support
Implements Power Management
Full driver support for all Major Operating Systems
BIOS supports for DOS, Windows and MAC OS(only for inic-1623TA2) applications without driver involvement.
Supports Plug and Play allowing users to change configurations without the use of jumpers

INIC-1615 Datasheet

Product Brief

Back to Top

Initio Inic 950 Driver Download

Free drivers for Initio INIC-950. Found 4 files for Windows XP, Windows 2000, Windows Server 2003, Windows 98, Windows 95, Windows NT, Windows 98 SE, DOS, OS/2, Netware, SCO, Unixware. Select driver to download.

Initio Inic 950 Driver

Free drivers for Initio INIC-940. Found 4 files for Windows XP, Windows 2000, Windows Server 2003, Windows 98, Windows 95, Windows NT, Windows 98 SE, DOS, OS/2, Netware, SCO, Unixware. Select driver to download.
Initio Corporation INIC-1511L PATA Bridge USBVID13fd&PID1040. Select the driver for your operating system and its bit. It is recommended to install a later version of the driver (see the release date). To go to the download file, click on the link. Searching results: Driver.
Windows device driver information for Initio INIC-941 PCI SCSI Host Adapter. The Initio INIC-941 PCI SCSI Host Adapter is created and manufactured by AdvanSys. The majority of the IDE/ATA hard disks are operated by incorporated IDE controllers that are embedded into the chipset on the motherboard.